MikroTik.TW-(台北ROS)Line ID:RouterOS
This page should be edited by the user community to reflect their tested hardware and version used.
See also:?Device driver list?in manual
[hide] |
Vendor | Model | ROS version? | Result? |
---|---|---|---|
HP | t5510 | > 5.x | Works OK. Boot from CF card connected to PATA (small, notebook). USB, COM and ethernet works. In routing ~40 Mb/s.?PCI not tested, but should works. |
Vendor? | Model? | ROS version | Result? |
---|---|---|---|
Asrock | Intel 82801G chipset | 3.0-3.14 | Bad performance, locks up under heavy load, supports multi cpu, PATA not supported, integrated ethernet not recognized. Maybe it’s just Asrock bad motherboard don’t know if the problem is in intel 82801G chipset tested on 2 motherboards, never tested on 2.9.x |
ASUS | P8H67-V (Intel? H67(B3), 3xPCI, 4xPCI-E) | 5.XX | Don’t work. “Kernel Panic”. Mikrotik has not driver compatibility with this motherboard. |
ASUS | ?P5B-Deluxe (Intel P965, 3xPCI, 3xPCI-E) | 3.13 | Works fine on Intel Core 2 Duo E6400. Not supported PATA controller. Both integrated Gigabit NIC (Marvell Yukon 88E8056 & 88E8001) works fine but only at 100Mbps. |
ASUS | P5B-V (Intel P965, 3xPCI, 4xPCI-E) | 3.13 | Works fine on Intel Dual Core E2180. Not supported PATA controller. Integrated Gigabit NIC Marvell Yukon 88E8001 works fine but only at 100Mbps. Winbox via MAC=problem, disconnects after 3 seconds. Winbox via IP no problem. |
ASUS | P5KC (Intel P35, 3x PCI, 3xPCI-E) | 3.10 | Not supported PATA controller (JMicron JMB363), ROS can boot from USB flash drive; internal ethernet not recognized. |
ASUS | P5GC-MX/1333 (2x PCI) | 3.7 | Works great for pentium dual-core e2160, hdd pata and sata, 1,5gb ram dual channel mode, except the attansic l2 ethernet onboard card is not recognized. |
ASUS | P5GC (6xPCI) | 2.9.39 | Ethernet recognized but not working |
ASUS | P7P55D PRO | 4.5 | Works ok, PATA controller (JMicron JM363) and internal Ethernet successfully recognized. |
ASUS | P6T SE | 4.0 | RouterOS boots and works with SATA disk set to ‘IDE compatibility mode’. |
ASUS | A7V133-C | 3.0 beta 7 | Works fine |
ASUS | A7V600-X | 3.25 | Works fine |
EPoX | EP-4VKMI | 3.16 – 3.24 | Works fine. |
EPoX | 8RDA+ | 3.6 | Work fine including integrated ethernet |
Intel | D815EGEW | 2.9.x | Excellent performance under 2.9. Not tested under v3. Onboard Ethernet Works perfectly. |
Intel | D845GVSRL | 3.7, 3.1, 2.9 | Very Stable, used for 4 years |
Intel | ?D945GCCRL | 2.9.43 & 3.0 beta 5 | Ethernet & DoM not recognized |
Intel | ?D945GCLF2 | 3.23 | 4 core’s, 2gb ram, 32gb ssd, no problems. |
Intel | D945GCPE | 3.0 beta 9 | Work fine including integrated ethernet |
Intel | ?D945GCNL | 3.11 | Works fine but integrated ethernet (just disable) goes up and down on reboots multi-cpu=yes. shared IRQ for PCI devices, decrease nic performace. |
Intel | D945GNT | 2.9.45 | Works fine |
Intel | DG33FB | 3.7 | Works fine, Ethernet but not working (IRQ 9), set in BIOS Security/XD Tegnology to disable |
Intel | DG950 | 2.9.42 | Ethernet not recognized |
Intel | DG965SWH | 3.0 beta 9 | Works fine, but only with SATA not IDE |
Intel | DH67BLB3 | 5.14 | Works Great with i7-2600k processor |
Intel | DP55WG | 4.6 | multi-cpu smp works great, onboard NIC not supported by RouterOS 4.6 yet though, must use pci/pci express nics |
Intel | DQ965GFEKR (D41676) | 3.7, 3.4 | Works fine on 3.7/3.4 if multi-cpu=no, BUT 3.5-3.7 fail to boot with E4600 processor and multi-cpu=yes |
Intel | S3210SHLC | 4.2 | Boot from USB stick. Work fine for my PPPoE server. Up to 1300 users with summary 200Mbit traffic. |
Intel | D945GZT-M | 3.0rc4 | Works fine |
Chaintech | ?AADF950 | 3.0 beta 5 | Works fine |
Abit | KT7E | 3.0 beta 7 | Works fine |
ECS | ?nForce3-A | 3.6 | Work fine including integrated ethernet |
ECS | P4M800PRO-M478 | 2.9.43 | No Apparent Problems, Disabled any unneeded devices in the BIOS |
Abit | BE6 | 2.9.43 | Works |
VIA | EPIA-MII12000 | 2.9.42 | Locks up under heavy load across wireless |
Supermicro | 5015M-MR | 2.9.28 | Motherboard is PDSMi w dual core |
Supermicro | PDSBM-LN2+ | 2.9.51 & 3.16 | http://forum.mikrotik.com/viewtopic.php?f=1&t=28184 |
Supermicro | PDSMi-LN4+ | 2.9.51, 3.13, 3.20 | Very stable even with dual-cores enabled. |
Gigabyte | GA-41M-ES2L | 3.28 | Works fine; CPU Intel Core2 Dual 2.7GHz; 2XRB44GV |
Gigabyte | GA-6BXS | 2.9.43 | Works fine |
Gigabyte | ?GA-8I848P-G | 3.6 | Work fine including integrated ethernet |
Gigabyte | GA-8ST667 rev. 3.0 | 3.13 | Works fine; CPU Intel Celeron 2,4GHz; Chipset SiS 645DX; 5xPCI; |
Gigabyte | GA-M720-US3 rev 1.0 | 4.6 | Works fine (downvolted to 1.1V) |
Gigabyte | GA-MA790GP-UD4H | 3.30 | Works fine |
Gigabyte | K8-NS-ULTRA | 2.9.x-3.7 | Excelent work, including both onboard ethernet (100 and 1000 lan) |
Gigabyte | GA-MA770-DS3 (rev. 2.0) | 3.10 | Works fine and extreme stable include onboard LAN, IDE DOM can load normally |
Chipset P35 (Tested Using Gigabyte GA-P35-DS3L & Abit IP35) | 3.7 | Work fine but only with SATA, not IDE (Include DOM), bellow v3.7 problem with SATA too | |
Microsoft | ?Virtual PC 2007 | 3.7 | Installs and and tries to boot. |
VMware | Workstation v6.0.3 | 3.7 | Runs Wicked Fast! I have had up to 8 Ethernet interfaces running simultaneously. |
VMware | ESXi v4 | 3.30 | Select IDE type for virtual disk – works perfectly! |
Xen 3.2.1 on Intel C2Q | 4.x | Installs and runs fine on HVM bootloader using Intel VT technology. Even switches to RouterOS console from Dom0 shell. Ethernet interfaces work perfectly.?Do not install xen/kvm RouterOS packages! | |
DFI | AD73 Pro (Chipset VIA KT266A/VT8233ACD) | 2.9.x-3.30 | Works fine. All 5 PCI’s ocupied with 1 x LAN and 6 x R52H’s (3 in RouterBoard11 and 3 in RouterBoard14!) |
DFI | AK75-EC (Chipset VIA KT133A/686B) | 3.14-3.30 | Stable. All PCI’s ocupied with LAN, miniPCI-PCI adapters fitted with R5H/R52H’s and XR5’s |
Fujitsu Siemens | Primergy RX100S5 | 3.1, 3.7, 3.22 | Can Install from Netinstall with RAID (LSI) Controller enable. Can’t install from CD and Netinstall with only SATA or PATA mode.?But NOT RUN |
MSI | 785GM-E51 | 4.11 | Works fine, booted from USB stick, integrated LAN working |
RouterOS version 5 (Linux 2.6.35):
- e1000: Intel(R) PRO/1000 Network Driver – version 7.3.21-k6-NAPI
- e1000e: Intel(R) PRO/1000 Network Driver – 1.0.2-k4
- igb: Intel(R) Gigabit Ethernet Network Driver – version 2.1.0-k2
- bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.15 (May 4, 2010)
- tg3: c:v3.110 (April 9, 2010)
- atl1c: version 1.0.0.2-NAPI
- r8169: Gigabit Ethernet driver 2.3LK-NAPI
- sky2: driver version 1.28
RouterOS version 6 (Linux 3.3.5):
- e1000: Intel(R) PRO/1000 Network Driver – version 7.3.21-k8-NAPI
- e1000e: Intel(R) PRO/1000 Network Driver – 1.5.1-k
- igb: Intel(R) Gigabit Ethernet Network Driver – version 3.2.10-k
- bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.1 (Dec 18, 2011)
- tg3: c:v3.122 (December 7, 2011)
- atl1c: version 1.0.0.2-NAPI
- r8169: Gigabit Ethernet driver 2.3LK-NAPI
- sky2: driver version 1.30
Vendor? | Model? | ROS version | Result? |
---|---|---|---|
3Com | 3c905B?Cyclone 100BaseTX | 2.9.51 | Works! Extremely reliable, doesn’t fully support tagged vlans |
3Com | 3cSOHO100-TX [Hurricane] (rev: 48) | 3.14rc1 | Works |
3Com | 3c905C-TX/TX-M [Tornado] (rev: 120) | 2.9.51 | Works! Extremely reliable, doesn’t fully support tagged vlans |
3Com | ?3c905C-TX/TX-M [Tornado] (rev: 116) | 2.9.51 | Works! Extremely reliable, doesn’t fully support tagged vlans |
3Com | 3c905B-FX Fast Etherlink XL FX 100baseFx [Cyclone] (rev: 0) | 2.9.43 | Works but no link in Winbox and no Graph in Dude?!!!! |
Adaptec | ANA-6944A/TX Quad 10/100MBit | >=3.20 | Works |
Compaq | NC3122 Fast Ethernet Server Adapter | 3.30 | recognized but not working |
Intel | S82557 10/100MBit | 2.9.43 | works |
Intel | PWLA8391GT PRO1000/GT | 3.7, 3.1, 2.9 | Extremely Stable, used for years |
Intel | PWLA8391GTL PRO1000/GT | 3.4 | Extremely Stable, used for years |
Intel | 82575EB & 8257GB | 3.15 | Added support |
Intel | 82576 Gigabit ET Quad port | 4.5 | Not recognized |
Intel | 82576 Gigabit Dual Port (e1g42et) | 5.8 | Works |
Intel | 82572EI (EXPI9300PTBLK) | 4.5, 4.6 | Works |
Intel | 82572GI (EXPI9400PTBLK) | 4.5, 5.14 | Works |
Intel | 82574L (EXPI9301CT) | 5.14 | Supported in ROS 5 / Works |
Intel | 82571EB (EXPI9404PT) QUAD COPPER | 4.6, 5.14 | Works |
Intel | S82557/S82555 10/100 Mbit TX | 2.9.50 / 3.16 | Works Stable! FCC ID:EJMNPDSPD035 |
Intel | PRO 1000 MT | 2.9.51 | Works |
Intel | 82541GI/PI Gigabit Ethernet Controller (rev: 5) | 2.9.49 | Working but with high traffic (>100M) and many packets makes drops |
Intel | 10Gbit Ethernet PCI Express | 3.17 | Works |
Intel | 82557/8/9 Ethernet Pro 100 (rev: 5)/Dual ports(Two ports/2-port)/RJ-45″ | 4.10 | Works, fine! |
Intel | 82599ES – Intel X520 series adapters | 5.x & 6.x | Works, fine! Note: has SFP transceiver vendor restrictions:http://www.intel.com/support/network/adapter/pro100/sb/CS-030612.htm |
D-Link | DFE-528TX rev. E1 | 3.13 | Works |
D-Link | DFE-580TX 4-port | 3.0 beta 5 | Bad card, not recommended. Hangs router |
D-Link | DFE-530/538TX | 2.9.43 – 3.x | Works well, no apparent problems. |
D-Link | DUB-E100 USB | 3.18 | added support, reported to be working |
Marvell | 88E8001 Gigabit Ethernet Controller (rev: 20) | 3.13 | Works |
Marvell | 88E8056 | 3.6 | reported to be working with some BIOS setting enabled |
DECchip | 21143 (ZYNX ZX410 4-port cPCI) | 2.9.51 | Working |
Realtek | RTL-8169 Gigabit Ethernet x4 (rev: 16) | 3.0-3.11 | Working Extremely reliable, used 4 mounts |
Realtek | RTL8111 (10/100/1000Mbit) | 3.10 | Seems to be working only in older RouterOS v3 releases, v3.10 and before. |
Realtek | RTL8111C, RTL8111DL (10/100/1000Mbit) | 4.6 – 4.11 | Working |
Realtek | RTL8139C+ | 3.14 | Works |
Realtek | RTL8139D | 3.x | Some work, others don’t. Check for yourself. |
Realtek | RTL-8139/8139C/8139C+ (rev: 16) | 4.9 & 4.10 | Works, fine! |
Realtek | RTL-8029(AS) (rev: 0)” | 4.9 & 4.10 | Works, fine! |
StarTech | ST10000SPEX4 – 4 Port PCIe Gigabit Ethernet Network Card | 6.7 | Works, great! |
ZNYX | ZX346Q | 3.27 | Works |
VIA | VT6102 [Rhine-II] (rev: 67)” | 4.9 & 4.10 | Works, fine! |
Vendor? | Model? | Tested RouterOS version? | Comments? | Format? |
---|---|---|---|---|
AirPrime/Sierra | PC 5220! | v3.x and higher | PCMCIA | |
Alcatel | One Touch X020X USB(aka Longcheer WM66; Nuton NT36HD; MWalker mbd 100hu; Novacom GNS-3.5G White, SU-8200U; MTE MW610?) | v5.10 and higher | Config likeOption_Globetrotter_HSDPA_USB_ModemConnected to Internet, Did not test Speed + Reliability (Alcatel OT X020X on x86) (data 0, info channel: 2) | USB |
AnyData | ADU-E100A(aka “USB Wireless HSDPA/UMTS 2.1GHz GSM/GPRS/EGPRS 900/17000MHz/CDMA 1x EVDO Rev.A”) | v3.x and higher | USB | |
AnyData | ADU-500A USB(aka “USB Wireless HSDPA/UMTS 2.1GHz GSM/GPRS/EGPRS 900/1800MHz/CDMA 1x EVDO Rev.A”) | v3.x and higher | USB | |
AnyData | ADU-E630WH( aka “USB Wireless HSDPA/UMTS 2.1GHz GSM/GPRS/EGPRS 900/17000MHz/CDMA 1x EVDO Rev.A”) | v6.x and higher | USB | |
Audiovox | PC5220 CDMA Dual Band 1XEV-DO PC Card | v3.x and higher | PCMCIA | |
C-motech | CNU-680 CDMA 1x EV-DO 450Mhz USB Modem (used by Triatel)?[1] | v3.x and higher | USB | |
Dell | 5520 | v3.x and higher | MiniPCI-E | |
Dell | Wireless 5530 HSPA | v6.1 and higher | Data channel 0, Info channel 0, init: AT+CFUN=1 (needs manualy change profile by command AT*ENAP=1,1) | MiniPCI-E |
Ericsson | Ericsson_F3507g_Mobile_Broadband_Module[2] | v3.x and higher | Set init string AT+CFUN=1, data channel and info channel to 3. | MiniPCI-e |
Huawei | E226 USB modem, | v3.x and higher | USB | |
Huawei | E220 USB modem, E200BIS?[3] | v3.x and higher | USB | |
Huawei | E169 USB modem (used by Tele2)?[4] | v3.x and higher | USB | |
Huawei | E180 USB modem | v3.x and higher | USB | |
Huawei | E1553 USB modem | v3.x and higher | USB | |
Huawei | E1550?[5] | v3.x and higher | USB | |
Huawei | E1762 USB Modem | v5.14 and higher | Locks up occasionally on 433UAH. Need to unplug to reset. | USB |
Huawei | E372 (USB) Videotron Canada | v5.15 and higher | Data channel 0 , Info channel 0, APN ihvm.videotron, Phone=*99# , Dial=ATDT , | USB |
Siemens | M20 | v3.x and higher | ||
Huawei | E620; | v3.x and higher | PCMCIA | |
Kyocera | KPC650 | v3.x and higher | PCMCIA | |
Nokia | CS-17 (USB) | v5.0 and higher | Data channel=2, info channel=4 | USB |
Nokia | CS-18 (USB) Rogers Canada | 5.12 and higher | Data channel=1, Info channel=1, APN=internet.com, Phone=*99# , Dial=ATDT , pap , Tested on rb-751 and rb-493 | USB |
Novatel | EU740 | v3.x and higher | MiniPCI-e | |
Novatel | EU870?[6] | v3.x and higher | MiniPCI-e | |
Novatel | MIFI 2372 Bell Canada | v5.12 and higher | Data Channel=0 , Info Channel=0, APN=pda2.bell.ca , Phone=*99# , Dial=ATDT , pap, Tested on Rb-750UP and RB-493 | USB |
Novatel | EV620 CDMA/EV-DO | v3.x and higher | MiniPCI-e | |
Novatel | Merlin ES620 / Merlin ES720 / Ovation U720[7] | v3.x and higher | USB | |
Novatel | Merlin ES620 | v3.x and higher | ||
Novatel | Merlin S720 (HSDPA)?[8] | v3.x and higher | PCMCIA | |
Novatel | Merlin XU870 HSDPA/3G?[9] | v3.x and higher | ExpressCard | |
Novatel | U720 Wireless CDMA Modem | v4.5 and higher | USB | |
Novatel | U730 (Wireless HSDPA Modem)?[10] | v3.x and higher | PCMCIA | |
Novatel | Wireless CDMA card | v3.x and higher | ||
Option Fusion | UMTS Quad-GPRS | v3.x and higher | PCMCIA | |
Option Globetrotter | HSDPA USB aka Teltonika ModemUSB/H7.2 (U3G150)?[11] | v3.x and higher | USB | |
Option Globetrotter | Probably most of the cards needing the HSO driver on Linux, tested: HSDPA USB (Globetrotter iCon 225?[12] | v5.12 | Option_Globetrotter_HSDPA_USB_Modemsee Workaround for Globetrotter devices offering no modem interface | USB |
Option | Qualcomm 3G WCDMA Model M00201-10886 (GTM378)?[13] | v3.x and higher | miniPCI-e | |
Option | Qualcomm 3G CDMA Model M00301 (GTM380)[14] | v3.x and higher | Set data channel and info channel to 3. | miniPCI-e |
Option | Qualcomm 3G CDMA Model M00401 (GTM382)[15] | v3.x and higher | miniPCI-e | |
Ericsson | 3G F3607gw miniPCI-e | v3.x and higher | Set data channel and info channel to 2, set init string AT+CFUN=1 | miniPCI-e |
Sierra Wireless | Aircard 595?[16] | v3.x and higher | PCMCIA | |
Sierra Wireless | Aircard 595U USB Sprint Card?[17] | v3.x and higher | USB | |
Sierra Wireless | USB 306 | v5.9 and higher | Data & Info Channel 2. For Telecom NZ use APN internet.telecom.co.nz and Phone number *99# | |
Sierra Wireless | USB 308 or AT&T Shockwave?[18] | v5.0rc11 and higher | AT Commands are sent through Data Channel 2 or 3. | USB |
Sierra Wireless | AirCard 312U?[19] | v5.2 and higher | USB | |
Sierra Wireless | AirCard 320U?[20] | v5.2 and higher | USB | |
Sierra Wireless | AirCard 580?[21] | v3.x and higher | PCMCIA | |
Sierra Wireless | AirCard 595?[22] | v3.x and higher | PCMCIA | |
Sierra Wireless | AirCard 597E?[23] | v3.x and higher | ExpressCard | |
Sierra Wireless | AirCard 875?[24] | v3.x and higher | PCMCIA | |
Sierra Wireless | AirCard 880?[25] | v3.x and higher | PCMCIA | |
Sierra Wireless | AirCard 880 E?[26] | v3.x and higher | ExpressCard | |
Sierra Wireless | AirCard 881?[27] | v3.x and higher | PCMCIA | |
Sierra Wireless | AirCard 881 E?[28] | v3.x and higher | ExpressCard | |
Sierra Wireless | EM5625?[29] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC5720?[30] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC5725?[31] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC8705?[32] | v5.1 and higher | MiniPCI-e | |
Sierra Wireless | MC8755?[33] | v3.x and higher | ||
Sierra Wireless | MC8755 for Europe?[34] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC8765?[35] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC8775?[36] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC8780?[37] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC5725?[38] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC5727?[39] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC8785 | v3.x and higher | MiniPCI-e | |
Sierra Wireless | MC8790?[40] | v3.x and higher | Few models do not send echo for input commands, modem does not work properly. | MiniPCI-e |
Sierra Wireless | MC8792?[41] | v5.2 and higher | Info works only in channel 3. Channels 4 and 5 has limited AT set. datachannel=4, infochannel=3 | MiniPCI-e |
Sierra Wireless | MC8781?[42] | v3.x and higher | MiniPCI-e | |
Sierra Wireless | 598 (Sprint) USB?[43] | v3.x and higher | USB | |
Sierra Wireless | MP3G – EVDO | v3.x and higher | ||
Sierra Wireless | MP3G – UMTS/HSPA | v3.x and higher | ||
Sierra Wireless | Compass 885 (USB)?[44] | v3.x and higher | USB | |
Silicon Labs | MobiData GPRS USB Modem | v3.x and higher | USB | |
Sprint | U301/301U 4G wireless card?[45] | v4.6 and higher | C-MOTECH Co, FW301DOWMX, QUALCOMM Patch 33504–Tested with v4.11 on RB433UAH, Data CH=1 Info CH=3 Phone #777 for Sprint in US | USB |
Sprint | U300/300U 4G wireless card?[46] | v4.6 and higher | C-MOTECH Co, FW301DOWMX, QUALCOMM Patch 33504 | USB |
Franklin | M600 3G/4G wireless card?[47] | v5.x and higher | only 3G mode | MiniPCI-e |
Verizon | Express Network PC5220 (AirPrime 5220) | v3.x and higher | ||
ZTE | AC8700 | v3.x and higher | ||
ZTE | MF620 / MF622?[48] | v3.x and higher | USB | |
ZTE | MF620 / MF622 (3G)?[49] | v3.x and higher | USB | |
ZTE | MF100?[50] | v5.11 and higher | Set info channel=1, data channel=2 | USB |
ZTE | MF680?[51] | v5.4 and higher | Used by 3 in Sweden. Set data chanel to 1 | USB |
ZTE | MF668?[52] | v4.5 and higher | for Rogers Wireless (Canada) Set APN: isp.apn and Info & Data Channel to 1 | USB |
T-Mobile (Germany) | Web′n′Walk Box Micro (Huawei E220)[53] | v3.x and higher | USB | |
Vodafone (Germany) | Easybox 2 (Huawei E220)?[54] | v3.x and higher | USB | |
Surfbox Mini (Huawei E220)?[55] | v3.x and higher | USB | ||
E-Plus & Base (Germany) | USB Minimodem (Huawei E220)?[56] | v3.x and higher | USB | |
Huawei | E600 | v3.x and higher | PCMCIA | |
Novatel | Merlin V640/XV620?[57] | v3.x and higher | ExpressCard | |
Novatel | Merlin V620/S620?[58] | v3.x and higher | PCMCIA | |
Novatel | Merlin EX720/V740/X720?[59] | v3.x and higher | ExpressCard | |
Novatel | Merlin V720/S720/PC720?[60] | v3.x and higher | PCMCIA | |
Novatel | Merlin XU870 HSDPA/3G?[61] | v3.x and higher | ExpressCard | |
Novatel | X950D?[62] | v3.x and higher | ExpressCard | |
Novatel | ES620/ES720/U720/USB720 | v3.x and higher | USB | |
Novatel | E725/E726?[63] | v3.x and higher | MiniPCI-e | |
Vodafone | EU740/Novatel non-Vodafone EU740 | v3.x and higher | MiniPCI-e | |
Vodafone | K3565/Huawei E160?[64] | v3.x and higher | USB | |
Novatel | EU850D/EU860D/EU870D?[65] | v3.x and higher | MiniPCI-e | |
Novatel | MC930D/MC950D?[66] | v3.x and higher | USB | |
Novatel | MC727/U727?[67] | v3.x and higher | USB | |
Novatel | Expedite EV620 CDMA/EV-DO | v3.x and higher | MiniPCI-e | |
Novatel | Expedite EU740 HSDPA/3G, Dell Wireless 5500 Mobile/Dell Wireless 5505 Mobile | v3.x and higher | MiniPCI-e | |
Novatel | Expedite E720 CDMA/EV-DO | v3.x and higher | MiniPCI-e | |
Novatel | Expedite ET620 CDMA/EV-DO | v3.x and higher | PCMCIA | |
Onda | H600/ZTE MF330 | v3.x and higher | ||
Onda | MDC525UP | Not supported | USB | |
Onda | MT833UP (opt. ext. antenna) | v5.6 and higher | Set info channel=1, data channel=0 | USB |
Onda | MT835UP (opt. ext. antenna) | v5.21 and higher | Set info channel=1, data channel=0 | USB |
BP3-USB & BP3-EXT HSDPA | v3.x and higher | USB | ||
ZTE | MY 39 (MSM 6500 based)?[68] | v3.x and higher | PCMCIA | |
Cricket | A600 | v3.x and higher | ||
Globetrotter | HSDPA Modem Option N.V. | v3.x and higher | ||
Sony Ericsson | MD300 | v3.x and higher | ||
ZTE | MF 626?[69] | v3.x and higher | USB | |
ZTE | MF 627?[70] | v3.x and higher | USB | |
Pantech / UTStarcom | UM175 | v3.x and higher | USB | |
Novatel | U760?[71] | v3.x and higher | USB | |
ZTE | K3565-Z?[72] | v4.4 and higher | Revision: BD_P673A2V1.0.0B09 | USB |
Novatel | Expedite EV620 | v4.5 and higher | MiniPCI-e | |
Novatel | MC760 VMU?[73] | v4.5 adn higher | USB | |
Franklin Wireless | FW300DOWMX | v4.5 and higher | ||
Huawei | EC1260 | v4.5 and higher | USB | |
Vodafone | K3520-Z?[74] | v4.6 and higher | USB | |
Vodafone | K3765?[75] | v4.6 and higher | USB | |
Telstra | 3G Elite | v5.x and higher | USB | |
Vodafone | Huawei K4505 | v5.x and higher | Data-channel=0 Info-channel=3 | USB |
Vertex | VW 110 | v5.x and higher | ||
ZTE | MF112?[76] | v5.x and higher | Power issues on mipsbe boards | USB |
Huawei | ET127 | v5.x and higher | 3G | |
Huawei | EC1261 | v5.x and higher | USB | |
Huawei | E173?[77] | v5.x and higher | USB | |
ZTE | MF190?[78] | v5.x and higher | Data channel=3 and info Channel=1 | USB |
ZTE | MF102?[79] | v5.x and higher | Works! Possible that need to change data channel=2 and info channel=2 | USB |
Option Globetrotter | GT380 | v5.x and higher | ||
Simcom | 5220 | v5.x and higher | ||
Huawei | K3770 | v5.x and higher | ||
Novatel | USB551L (Verizon)?[80] | v5.9 and higher | Only 3G support (No LTE support) | UB |
Novatel Wireless | MIFI4510 | Not supported | ||
ZTE | MC2718?[81] | v5.8 and higher | Possible data-channel=0 info-channel=1 GPS(NMEA)=4 | MiniPCI-e |
LG-VL600 (Verizon) | Not supported | |||
Huawei | EC156?[82] | v5.8 and higher | USB | |
Vodafone | K3806?[83] | v5.8 and higher | USB | |
ZTE | MF-210V?[84] | v5.9 and higher | MiniPCI-e | |
Huawei | E398?[85] | v5.9 and higher | USB | |
Huawei | E367 | v5.11 and higher | USB | |
Huawei | EM770?[86] | v5.11 and higher | MiniPCI-e | |
Nokia | E52 (Series 60) | v5.12 and higher | Set Usb mode to “PC Suite” in phone menu, Baud rate – 115200, Ports – 0/0, APN – internet, no modem init string, Dial number – *99# | USB |
Nokia | 6700 Classic (Series 40) | v5.12 and higher | Set Usb mode to “PC Suite” in phone menuBaud rate – 115200 Ports – 0/0 APN – internet Modem init string – ATZ, Dial number – *99#
Phone is charged up through the USB port |
USB |
Alcatel | X220S?[87] | v5.13 and higher | USB | |
MO835UP | v5.14 and higher | USB | ||
Nokia | Datacard CS-11 & CS-15 | v5.14 and higher | USB | |
ZTE | MF821 | v5.15 and higher | USB | |
Huawei | K4510?[88] | v5.15 and higher | USB | |
Huawei | E173s | v5.15 and higher | USB | |
Huawei | E352 | Supported, if you remove the PIN and change the Data-channel to ‘2’. Info-channel is ‘0’. | USB | |
Option3G | Mini-PCI model GTM661W | Not supported | USB | |
Option | 225 | v5.15 and higher | USB | |
ZTE | AC682 | might not work | USB | |
ZTE | AX320 | v5.15 and higher | USB | |
ZTE | MF 652 | v5.15 and higher | USB | |
Vodafone Huawei | K-4605 | v5.15 and higher | USB | |
Huawei | E353 | v5.15 and higher | Some revisions might not work. | USB |
CELOT | CT-680 | v5.16 and higher | USB | |
Huawei / ZTE | 669T?[89] | v5.8 and higher | Info/data=1 and 2 worked | USB |
Huawei / ZTE | MF195?[90] | v5.18 (maybe 5.17, but 5.16 not worked) | Info/data=1 worked | USB |
Haier | CE81B | v5.21 | USB | |
Huawei | E1731 | v5.21 and higher | USB | |
Huawei | EM820W?[91] | v5.11 and higher | Data channel=0, Info channel=2, Keep info channel open | MiniPCI-e |
Alcatel | X221L?[92] | v5.20 and higher | USB | |
Telecom | NZ T-Stick ZTE MF-181 | v6.0rc13 | Data Channel=2, Info Channel=2, APN internet.telecom.co.nz, PHONE=*99#. Tested ok for both data and SMS on CCR1016-12G | USB |
Huawei | MU609 mPCIe?[93] | v6.0 | Data channel=4, Info channel=2, Keep info channel open | MiniPCI-e |
Huawei | ME909u-521?[94] | v6.0 | Data channel=4, Info channel=2, Keep info channel open | MiniPCI-e |
*?– Currently MikroTik RouterOS works with PPP 3G modems over serial interfaces, 4G modems with IP drivers are not supported.
LTE should be configured under the new “/interface lte” menu
Model? | Tested RouterOS version? | Comments? | Format? |
---|---|---|---|
BandRich C501?[95] | v5.25 and v6.0 | USB | |
Sierra Wireless MC7710/MC7700?[96] | v5.25 and v6.0 | If modem uses firmware 3.5 it should be upgraded to 3.5.23.2 firmware release in order to work in RouterOS correctly again. | MiniPCI-e |
Sierra Wireless AirCard 320U?[97] | v6.0 | Vendor/product id pair should be 0x0f3d/0x68AA and DirectIP firmware loaded on the modem. | USB |
Yota LU150?[98] | v5.22 and v6.4 | Some settings are ignored. Works in Russian markets. | USB |
Yota WLTUBA-107[99] | v6.0 | Some settings are ignored. Works in Russian markets. | USB |
Yota wifi modem[100] | v6.7 | Some settings are ignored. Works in Russian markets. | USB |
Vodafone K4305[101] | v6.7 | Some settings are ignored. | USB |
Android usb tethering interface | v6.7 | Some settings are ignored. | USB |
ZTE MF823?[102] | v6.8 | Some settings are ignored. | USB |
Vodafone K4201-Z[103] | v6.8 | Some settings are ignored. | USB |
ZTE MF827?[104] | v6.8 | Some settings are ignored. | USB |
Huawei E3272?[105] | v6.8 | Some settings are ignored. | USB |
Huawei ME609?[106] | v6.11 | MiniPCI-e | |
Huawei ME909u-521[107] | v6.11 | MiniPCI-e |
NB! New flash cards need always formatting!
Legend:
- V – works
- X – doesn’t work
- ? – not tested
- NA – not available for this RB
Model? | Type? | RB600? | RB1000? | RB433AH? | RB450G? | R493G? |
---|---|---|---|---|---|---|
PQI 4GB 120x HiSpeed | CF | X | NA | |||
2GB Transcend 133x | CF | X | NA | |||
2GB Kingston 133x (Elite Pro, code CF/2GB-S2) | CF | V | NA | |||
4GB Kingston 133x (Elite Pro) | CF | V | NA | |||
4GB Kingston CF/4GBIN | CF | X | NA | |||
8GB A-Data Speedy G08GNMC7B0095 | CF | V | V | NA | ||
16GB A-Data Speedy | CF | V | V | NA | ||
4GB Apacer Photo Steno IV 300X | CF | X | X | NA | ||
1GB Sandisk Ultra II BB05024GA | CF | V | V | NA | ||
2GB Sandisk Ultra II | CF | V | NA | |||
8GB Sandisk Ultra II | CF | V | NA | |||
8GB SanDisk Extreme III (200X,30MB/s) | CF | V | NA | |||
2.5GB Seagate ST1 (ST625211CF) | CF microdrive | V | V | NA | ||
8GB Seagate ST1 | CF microdrive | V | V | NA | ||
64MB Nokia | microSD | NA | NA | ? | V | |
512MB Kingston | microSD | NA | NA | V | ||
1GB Apacer | microSD | NA | NA | V | ||
1GB Kingston (SDC/1GB) | microSD | NA | NA | X | ||
2GB Kingston | microSD | NA | NA | X | X | |
2GB Traxdata | microSD | NA | NA | ? | V | |
4GB Apacer SDHC (class 6) | microSD | NA | NA | V | X | |
4GB Axiz | microSD | NA | NA | V | ||
4GB Kingston | microSD | NA | NA | V | ||
4GB Kingston SDHC (C04G JAPAN class 4) | microSD | NA | NA | V | ||
4GB Maxell SDHC (class 2) P-series | microSD | NA | NA | V | ||
4GB Transcend SDHC | microSD | NA | NA | V | ||
4GB Sandisk Mobile Ultra Micro SDHC (with card reader) | microSD | NA | NA | V | ||
8GB Sandisk SDHC (0733702482DLE) | microSD | NA | NA | V | V | |
8GB Sandisk Mobile microSDHC (SDSDQ-8192-A11M) | microSD | NA | NA | V | ||
8GB Sandisk Mobile Ultra SDHC (Class 6) | microSD | NA | NA | V | ||
8GB Kingston SDHC (Class 4) | microSD | NA | NA | V | X | |
8GB ADATA micro SDHC (AUSDH8GCL6) (Class 6) | microSD | NA | NA | V | ||
16GB Sandisk micro SDHC (SDSDQ-16384-P36M) class 2 | microSD | NA | NA | NA | X | |
16GB Sandisk micro SDHC (0835B03279DQ) class 2 | microSD | NA | NA | V | V | |
2GB Sandisk micro SDHC class 2 | microSD | NA | NA | NA | X | V |
4GB Sandisk Mobile microSDHC (SDSDQM-004G-B35S) class 4 | microSD | NA | NA | X | X | |
2GB Transcend microSD (TS2GUSD) class not stated | microSD | NA | NA | X |
Note: Pushing the “Kingston SDHC 8GB card” all the way into the socket caused the card not to work properly! It had to be pulled out ~1mm for it to work!
Model? | Form factor? | Platform? | ROS | Result? |
---|---|---|---|---|
RouterBOARD R52?[108] | miniPCI | ALL | ALL | Natively supported! |
RouterBOARD R52H?[109] | miniPCI | ALL | ALL | Natively supported! |
TechnicLan?TMP-5414A | miniPCI | All RouterBOARDs | 2.9 / 3.x / 4.x | Perfect, Stable |
CompexWLM54AG-20 | miniPCI | RB1xx / RB3xx / RB4xx / RB5xx / RB6xx / x86 | 2.9 / 3.x / 4.x | Perfect, Stable |
CompexWLM54A-26 | miniPCI | RB1xx / RB3xx / RB4xx / RB5xx / RB6xx / x86 | 2.9 / 3.x / 4.x | Perfect, Stable |
SparkLAN WMIA-165G | miniPCI | RB1xx / RB3xx / RB4xx / RB5xx / RB6xx / x86 | 2.9 / 3.x / 4.x | Perfect, Stable |
SparkLAN WMIA-166AG | miniPCI | RB1xx / RB3xx / RB4xx / RB5xx / RB6xx / x86 | 2.9 / 3.x / 4.x | Perfect, Stable |
SparkLAN WMIA-166AGH | miniPCI | RB1xx / RB3xx / RB4xx / RB5xx / RB6xx / x86 | 2.9 / 3.x / 4.x | Perfect, Stable |
Alfa AWPCI 085 H | miniPCI | RB1xx/RB333/RB4xx/x86 | 2.9&3.x | All just perfect |
TP-Link TL-WN550/551 | PCI | x86 | 2.9&3.x | Perfect 19dB rated, stable at 21 |
TP-Link TL-WN650/651 | PCI | x86 | 2.9&3.x | Perfect 19dB rated, stable at 21. Unstable with compression activated |
D-Link AG530 a/b/g (both rev.A1 and A2) | PCI | x86 | 2.9&3.x | Perfect. Works perfect, in both 2.4 and 5.x GHz |
D-Link DWL-G510 | PCI | x86 | only 2.9.x tested | Perfect. Tested Rev A1 |
D-Link DWL-G520 | PCI | x86 | 2.9.x & 3.x | Works well. |
D-Link DWL-G520+A/RaLink 2591 Chipset | PCI | x86 | 4.9 | NOT Work! |
Gigabyte b/g GN-WI01GT | miniPCI-e | x86 | 3.x | Works also in RouterBOARDs with miniPCI-e slot |
Senao NL-2511CD EXT2 | PCMCIA | x86&rb230 | only 2.9x tested | Perfect. Just about the most sensitive card i used, in the good sense. Only 11b. |
Planet WL-8310 | PCI | x86 | only 2.9.x tested | Perfect. Stability. |
Netgear WG311T 108 | PCI | x86 | only 2.9x tested | Perfect. stability |
SMC SMCWPCIT-G | PCI | x86 | 3.x tested | Perfect on A/B/G. |
Wistron DCMA-81 | miniPCI | x86,rb | 2.9.xx, 3.xx | Perfect on A/B/G with or without compression. |
Wistron DCMA-82 | miniPCI | rb | 3.xx | Works on some RB, but on 2/3 of my RB433 it causes the board to reboot when enabled. Many other people have had similar experiences. Not recommended. Maybe OK on 133 |
Senao NMP-8602 | miniPCI | x86&rb411 | 2.9x,3.x tested | Perfect on a/b/g |
Dbii?F20 | miniPCI | RB411 & RB433 | 3.x tested | Perfect on B/G, too thick for 3 in rb433 |
Dbii?F50 | miniPCI | RB411 & RB433 | 3.x tested | Perfect on A, too thick for 3 in rb433 |
Dbii?F20-PRO | miniPCI | RB411 & RB433 | 3.x tested | Perfect on B/G, too thick for 3 in rb433 |
Dbii?F50-PRO | miniPCI | RB411 & RB433 | 3.x tested | Perfect on A, too thick for 3 in rb433 |
TP-Link?TL-WN751ND] | PCI | x86 | v5.xx, v6.xx | Not Working! |
TP-Link?TL-WN851ND] | PCI | x86 | v5.xx, v6.xx | Working |
TP-Link?TL-WN881ND] | PCI-e | x86 | v5.xx, v6.xx | v5.xx NOT working not appear in interfaces, v6.x working (6.1 unstable after scan stop working in client or manual scan, set to AP-bridge mode working ok) |
XR2 | miniPCI | RB433 | 3.x | works |
XR5 | miniPCI | RB433, x86 | 3.x | works |
SR9 | miniPCI | RB433 | 3.x | works |
SR9 | miniPCI | RB411 & RB433 | 3.x | works |
ValemountKXS30SG | miniPCI | RB433 | 3.2 & 4.2 tested | B/G only, no A. Big heat sink means card should be installed on highest mount when other cards being used. High power consumption can cause power problems, otherwise works perfectly. |
Zcomax?XG-650 | miniPCI | RB112 & RB433 | 4.2 & 4.6 | Not working (driver doesnt work / exist). It has a TI TNETW1130GVF chipset. |
AR5BMB5 | miniPCI | RB411,x86 | 3.xx, 4.3 | Not working. Atheros chipset. |
Model? | Form factor? | ROS | Result? |
---|---|---|---|
RouterBOARD?R2N | miniPCI | 4.0b3 | works |
RouterBOARD?R52N | miniPCI | 4.0b3 | works |
RouterBOARD?R5H | miniPCI | v4 | works |
SparkLAN WMIA-198N | miniPCI | 4x, 5x | Works |
Compex?WLM200N5-23 | miniPCI | 4.0b3 | Works |
Compex?WLM200NX | miniPCI | 4.0b3 | Works |
Dbii?F52N-PRO | miniPCI | 5.1 | Works |
TP-Link Wireless N (2T2R) | miniPCI | 4.0b3 | Works |
Ubiquiti | miniPCI | 4.0b3 | Works |
Ubiquiti | miniPCI | 4.0b3 | Works |
Model? | Form factor? | Platform? | ROS | Result? |
---|---|---|---|---|
Farsite FarSync TE1 | PCI | x86 | 3.15 | supported |
Note: Since v3.15 RouterOS doesn’t support any Sync/T1/E1 cards except select Farsite models
Model? | Connection? | Platform? | ROS | Result? |
---|---|---|---|---|
EXAMPLE | USB | x86 | 3.30 | supported |
Post only tests since RouterOS v5beta5
Brand? | Model? | Motherboard? | RouterOS? | Works / Doesn’t? |
---|---|---|---|---|
Crystalfontz | CFA-633v1.5 | x86 | v5RC10 | Works |
Crystalfontz | CFA-633v1.3 | x86 | v5RC7-RC10 | Didn’t work |
Note:?USB storage device that does not require special drivers or is compatible to work with generic USB storage drivers will work. Devices include external hard drives, USB flash drives
Brand? | Model? | Works / Doesn’t? |
---|---|---|
generic | USB flash drive | Works |
Kingston | DataTraveler 2GB | Works |
Note:?when USB serial port is connected RouterOS might attach serial console on the port. Before using it for something else, disable the console on the interface
Brand? | Model? | Works / Doesn’t? |
---|---|---|
USB U209-000-R Serial-Port | Works | |
FT232RL chipset | Works |
Note:?see if device works with one of these linux kernel modules. If yes, it will be possible to use it on RouterOS
RouterOS on x86 have these modules enabled
- USB_PEGASUS
- USB_RTL8150
- USB_USBNET
- USB_NET_AX8817X
- USB_NET_CDCETHER
- USB_HSO
RouterOS on mips have these modules enabled:
- USB_NET_MCS7830
- USB_NET_AX8817X
- USB_NET_CDCETHER
- USB_HSO
- USB_USBNET
AX88178 (USB2.0 Gigabit Ethernet) recognized but not working.
注册有任何问题请添加 微信:MVIP619 拉你进入群
打开微信扫一扫
添加客服
进入交流群
1.本站遵循行业规范,任何转载的稿件都会明确标注作者和来源;2.本站的原创文章,请转载时务必注明文章作者和来源,不尊重原创的行为我们将追究责任;3.作者投稿可能会经我们编辑修改或补充。